bionmay.blogg.se - Lacie network assistant windows

#Lacie network assistant windows how to
#Lacie network assistant windows install
#Lacie network assistant windows update
#Lacie network assistant windows manual
#Lacie network assistant windows software

Your NAS OS 3 device alerts you when an update is available to NAS OS 4 or higher. Next stepsįirst Use: Update from NAS OS 3 to NAS OS 4 The device is ready to be accessed once the status LED has turned solid and the welcome page appears on the NAS Setup Wizard. Upon reboot, the status LED turns on and begins to blink. The NAS will use the USB key as the boot disk if it is not removed. Note on USB keys: If your Seagate NAS requires a USB key to boot to the NAS OS installer, you must remove the USB key before rebooting the device. Upon completion, you are prompted to restart the NAS. Make certain to note your login and password for future use. The setup formats the drives and installs NAS OS. The device is ready to be accessed once the status LED turns solid. Make certain to follow the instructions before continuing with the steps below.

#Lacie network assistant windows manual

The instructions for hardware installation are available on the quick start guide and user manual for your Seagate NAS.

You have the option to search for updates after the installation.

An error message informs you if it cannot check for updates due to a missing connection to the Internet.

#Lacie network assistant windows software

The NAS checks for software updates during the installation.Insert the hard drives once the diskless enclosure is powered on and the status LED is blinking.Since the boot order for the NAS starts with the hard drives, you can encounter a problem if it detects an earlier version of NAS OS or another operating system. Make certain to boot the NAS before inserting new hard drives.Make certain to back up data on the hard drives before installing them in the Seagate NAS enclosure. Data stored on the hard drives will be deleted. Important info: The Seagate NAS OS installer must format the hard drives inserted into the NAS. Choose the link below to view hard drives that are optimized for your Seagate NAS: Seagate hard drives are specially prepared for use with your Seagate NAS.

If you have any questions regarding hard drive compatibility, contact Seagate customer support. Older hard drives that are not constructed for NAS can experience reduced performance or failure. Seagate NAS are compatible with most SATA I, SATA II, and SATA III hard drives.

#Lacie network assistant windows how to

For more information, see Remote Access.Įnclosure with disks: If you purchased an enclosure with disks, go to First Use: Enclosures with Disks for instructions on how to set up Seagate NAS OS.

#Lacie network assistant windows install

Install Sdrive for local and remote access: Sdrive gives you easy access to shares and NAS OS on local and offsite networks.

Configure your NAS: For details on how to configure and use your Seagate NAS, go to Shares: Access and Transfer Files and Device Manager.

See Seagate Network Assistant for instructions. It will also provide quick access to shares and NAS OS. Seagate Network Assistant gives you instant information on your Seagate NAS, such as firmware version, IP address, and MAC address.

Simplify NAS access: Seagate recommends that you install the software utility Seagate Network Assistant before moving forward with the device configuration.

Create a Seagate Access account for remote access.

Create or change the administrator login (the default is admin).

Create or change the name of the device.

From a PC/Mac connected to the same network as your NAS, launch an Internet browser and type.

An error message informs you if it cannot check for updates due to a missing Internet connection.

NAS OS checks for software updates during the installation.

The NAS OS device's administrator should complete the installation steps.

For instructions, review your NAS's user manual and quick start guide.Įnclosure without disks: If you purchased an empty enclosure, go to First use: Empty enclosure for instructions on how to set up Seagate NAS OS.Ĭonsider the following before installing Seagate NAS OS:

Enclosure without disks: If you purchased an enclosure that did not include disks, go to First Use: Empty Enclosure.īefore connecting to NAS OS, configure the Seagate NAS on your network.

Enclosure with disks: If you purchased an enclosure with disks, go to First Use: Enclosures with Disks.

Choose the option below that matches your Seagate NAS: The time to complete the setup wizard varies based upon your NAS. The NAS’s administrator must complete the setup wizard since a password will be created to access the NAS OS management features. Once your Seagate NAS has been configured per the instructions of the included quick start guide, the NAS OS Setup Wizard will guide you through the remainder of the installation.